Find a freestanding steel or Aluline system for your workspace, or choose a ceiling-suspended arrangement. Compare the actual runway, bridge span, and equipment scope, then request your package.
Choose your support arrangement, capacity, runway planning length, and working dimensions. Compare documented steel and Aluline systems, then open the drawing and equipment scope.
19 documented configurations
Runway and height planning choices identify requested cases. Actual calculated dimensions appear on each system and its drawing. Trolley-saddle height is a mounting datum; usable hook height is confirmed with the selected hoist.
Showing 15 of 19 configurations · Freestanding systems
Browse system families or compare every documented reference.
Freestanding steel references with 550 or 1,100 lb capacity and documented saddle-height choices.
Selected reference1,100 lb freestanding steel workstation, 12 ft requested saddle
Rated capacity
1,100 lb
Actual runway length
17′-9 3/16″ · 5,415 mm
Bridge span
15′-7″
Floor to trolley saddle
12′-0″
Included hoist
DC Com 5-500 1/1 H5 V5.4/1.3 460/60
Hoist nominal lift
16 ft
Power supply
460 V / 3 phase / 60 Hz
Runway power feed
Festoon
Hoist power feed
Festoon
Requested saddle height is a planning choice. The actual floor-to-saddle datum is shown above; usable hook height requires confirmation with the selected hoist.
Freestanding equipment reference. Fabricated support steel supply and engineering scope require IMH confirmation.
Documented wide-span steel systems and the 2,200 lb extended-runway reference.
Selected reference30 ft runway, 550 lb wide-span steel system
Rated capacity
550 lb
Actual runway length
29′-11 15/16″
Bridge span
25′-5 1/8″
Floor to trolley saddle
14′-0″
Included hoist
DC Com 2-250 1/1 H5 V7.2/1.8 460/60
Hoist nominal lift
16 ft
Power supply
460 V / 3 phase / 60 Hz
Runway power feed
Festoon
Hoist power feed
Festoon
Requested saddle height is a planning choice. The actual floor-to-saddle datum is shown above; usable hook height requires confirmation with the selected hoist.
Freestanding equipment reference. Fabricated support steel supply and engineering scope require IMH confirmation.
Requested saddle height is a planning choice. The actual floor-to-saddle datum is shown above; usable hook height requires confirmation with the selected hoist.
Freestanding equipment reference. Fabricated support steel supply and engineering scope require IMH confirmation.
Requested saddle height is a planning choice. The actual floor-to-saddle datum is shown above; usable hook height requires confirmation with the selected hoist.
Freestanding equipment reference. Fabricated support steel supply and engineering scope require IMH confirmation.
Each documented system has a defined equipment scope. Site supports, clearances, freight, and order details require IMH confirmation. Request a complete equipment quote directly from IMH.
Your application. Your system.
Configure your workspace.
Share your load, working area, lifting requirements, support arrangement, and available power. IMH reviews your selections using DEMAG Designer and confirms the equipment, drawing, and quote for your application.
1. Set your requirementsEnter the dimensions and options you need. You can save a request even if some details need our help.
2. IMH checks the systemWe review the crane configuration, supports, hoist, clearances, and electrical scope.
3. Review your drawing and quoteIMH prepares OEM configuration drawings and a written quote for the confirmed package.
The on-screen layout is preliminary. IMH reviews the request before issuing OEM drawings and final pricing. A selected trolley-saddle height does not establish usable hook height.
Images show representative DEMAG installations. Your selected support arrangement and final kit may differ.
Selected configuration drawing
